NDC-F18 Access Control Panel

The NDC-F18 panel operates as a totally stand-alone unit with a fully distributed database. All valid card numbers, time zones and relay pulse times are loaded into the controller's memory. The panel controls access into two doors on a stand-alone basis with no dependency on a central computer system.

A key feature of the NDC-F18 includes its completely distributed database. All card information, time zone information, relay control information and alarm point information is loaded into the NDC-F18 memory. The unit can operate as completely stand-alone with no dependence on any other equipment. The most important feature of any access control system is the ability to be expanded. The NDC-F18 operates as a stand-alone two-door controller. 32 NDC-F18 panels may be connected via RS485 bus if it is necessary to increase the system. A total system is achieved by connecting each drop-line to a communication port or modem or Ethernet terminal server via NDC-B052 network access control panel.

NDC-F18 is placed into the rugged steel box with uninterruptible power supply, tamper switch and key lock. It is designated for high security installations and is completely autonomous after the programming.

- Supports all Wiegand reader technologies

- Distributed database for independent operation

- Operates in remote site configurations with dial-up (requires NDC-B052)

- Card memory 4 096

- Buffer 8 094

- 4-wire RS-485 communications, protection rated at 3000 V

- RS232 communication port

- 8 supervised programmable inputs

- Tamper switch contact

- 4 Form C relays

- Energized transistor output with electronic protection - 255 time zones to control card access - Local antipassback function